Model 19 cabinet plan available

[Art J.]

Hi Jeff, I pushed the limits of Upload net with a 1meg file.
Hitting refresh a few times works. If you would like it for
your web page, I can do more work on it. I can send you
the 2meg master if your e-mail would accept a 2meg file.

[bushdoggy]

Hello Jeff we have not met but I,ve viewed your site several times. I read your post on the model 19 plans last nite and today thier on your site, holy **** your quick. I ,ve owned model 19's for over ten years and have wanted to improve them, tried emailing Jim Dickenson with no luck, been reading Todd W White's super crossover is just around the next corner for years. Great Job Jeff and THANKS.

[Art J.]

I tried to make an enhanced supplement in Photo-Shop
that may be easier on the eyes. It printed well with adjustments.

http://img2.uploadimages.net/875793model19b.jpg

[jmarkwart]

Art,

That looks great! Send it to me when you get through tweaking and I'll put it up on my pages - I think I have a bit more room left!

Jeff

[Art J.]

My JPEG on Upload net must have been too
large for thier system. The moderator cut
it down to 755k loosing the bottom. He was
nice enough to leave it instead of axing it.

[RonSSS]

Jeff,
I printed a B size of your drawing, 24x36 I think. anyway, it's reasonably legible.
I'll have to try and print a big version of the .jpg that ART did.
Thanks again!
Ron

[RonSSS]

Art,
I was able to send your .jpg to the big printer. It looks pretty good! Actually readable.
Maybe I'll splice it on to the one from Jeff and almost have a nice document!
Thanks for saving me the trouble to measure and create a drawing.
I wonder what happened to Jim Easley....hope he is ok.
Ron

[Art J.]

Be patient with me guys.
This will take a while.
I'm thinking of 4 printable sheets
that can be used in the work shop.
I'm re-typing critical numbers too.
Here is a sample,

http://img2.uploadimages.net/305270draft_copy.jpg

I hope Jim is OK too.
Come save me Jim !